304 North Cardinal
St. Dorchester Center, MA 02124

Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

Why Does My Vacuum Cleaner Sound So Loud?

One of the most common questions is “Why does my vacuum cleaner sound so loud?” This is usually the result of worn parts or clogged tubes. Luckily, there are many solutions, including replacing worn parts with new ones or taking your machine in for service.

Listed below are a few solutions to the problem. If none of these solutions work, read on. Here are the most common causes of loud vacuum noises.


If your vacuum cleaner is a little noisy, you can check your filter. If it is dirty, it will make it harder to produce powerful suction.

You can also purchase noise-cancelling headphones, which will prevent your household from being affected by the noise. The following are some tips on how to make your vacuum cleaner quieter.

Hopefully, one of them will help you solve your problem. If the problem persists, you should contact your vacuum cleaner manufacturer for assistance.


Several factors can cause the motor of a vacuum cleaner to make such a high-pitched noise. Insufficient airflow can be the culprit as it causes a vacuum to work harder, producing more noise.

The size of the motor also impacts its decibel level. Some manufacturers have reduced the size of the motor, which makes the product quieter.

Likewise, manufacturers have simplified the design of the motor. To improve the suction of a vacuum cleaner, they have made their motors smaller.


One of the first things you should check if your vacuum is making a noisy noise is the brush bearing. Sometimes, this is due to a broken brush.

To fix the problem, remove the brush and replace it with a new one. If you aren’t comfortable doing this, you should visit a vacuum repair shop. Another possible reason for your vacuum to be making noise is a damaged fan.

Clogs in the tubes

If your vacuum is sounding too loud, it may be because of clogs in the tubes. To clear these clogs, you should first remove any clogs from the hose.

To do this, you can insert a paper towel, stick or knitting needle into the inlet and work it out by building pressure. If all else fails, you can try to replace the brush head.

Broken brush bearings

If you’re worried that your vacuum is too loud, the problem might be a broken brush bearing. The brush is an important part of the vacuum, as it helps the suction to pull the dirt out.

But if your brush has a broken bearing, you may be hearing an irritating vibrating noise. While you can’t repair a broken brush, you can clean it. Here are some simple tips to fix the problem.

Broken brush

Most vacuum cleaners make a loud noise while they are in use, but sometimes, it is the brushes that are broken or the motor fan itself. In either case, you can easily repair the problem by reinforcing it or cleaning it with warm water and soap.

A new filter can also reduce noise levels. Some of the quietest vacuums include the Numatic Henry Extra Vacuum Cleaner With AutoSave Technology, Electrolux Sanitaire SC3700A Quiet Clean Canister Vacuum, Hoover Commercial CH50400 Hush Tone Lite Upright Vacuum, and Eureka EasyClean Corded 71B Handheld Vacuum.

Clogged air or exhaust filter

When you vacuum, you will likely hear noise coming from your vacuum cleaner. While this is normal, there are some instances when a vacuum is causing too much noise.

The most common cause of vacuum noise is a clogged filter or hosepipe. A dirty filter makes your vacuum work harder to get rid of dirt and dust. Fortunately, it is simple to clean these components and get your vacuum back to its normal sound levels.

Share your love

Greetings, I’m Richard. I own and operate a small vacuum shop in Downtown New York. With this blog, I hope to assist you in selecting the right vacuum for stairs.

Articles: 31


Leave a Reply

Your email address will not be published. Required fields are marked *